Tx Track Pro
The versatile transmitter with a wide detection zone
Versatile transmitter
The Tx Track Pro is a versatile Freelap transmitter designed to act as a start, split or finish point depending on your setup.
Use it across several disciplines, including biking, alpine skiing, biathlon and speed skating, with a wide detection zone and fast setup in the field.
What is the Tx Track Pro used for ?
- start
- split
- finish
Choose the correct START, LAP or FINISH code according to your training scenario, then place the transmitter along the course.
Its extended detection zone makes it particularly suitable for disciplines where the athlete or rider cannot pass as close to the transmitter as in running.
The Tx Track Pro works with FxChip and FxChip BLE transponders, depending on the setup used.
Key strengths
Versatile
Use the same transmitter across several disciplines and for several roles in the setup : start, split or finish.
Wide detection zone
Benefit from a detection distance of approximately 3 m on each side, particularly useful for sports such as skiing, biking, biathlon or speed skating.
Easy to configure
Quickly select the START, LAP or FINISH code according to your needs.
Robust and rechargeable
Use a field-ready transmitter, designed to be resistant and rechargeable.
Multisport compatible
Integrate the Tx Track Pro into several configurations depending on your sport and level of practice.
Use according to your sport
01
Biking
Use the Tx Track Pro at the edge of the course to time a start, split or finish.
Place it less than 3 m from the rider’s or bike’s path, with the arrow perpendicular to the trajectory. For certain loop training setups, a single transmitter coded as FINISH may be enough.
Click on the video to watch the full version
02
Alpine skiing
Use the Tx Track Pro as a split or finish transmitter.
Place it less than 3 m from the skier’s path. To widen the detection zone, you can also place it under the snow in the finish area, which provides coverage of approximately 6 m.
Click on the video to watch the full version
03
Biathlon
Use the Tx Track Pro to create START, LAP or FINISH points on the course.
Place it at the edge of the track, less than 3 m from the athlete’s path, with the arrow perpendicular to the track. Depending on the setup, you can also integrate it into a loop configuration or add several split points.
Click on the video to watch the full version
04
Speed skating
Use the Tx Track Pro for loop timing, a complete section or to add split times.
Its wide detection zone makes it useful for track setups, whether for inline skating or short track.
Click on the video to watch the full version
Technical specifications
- Functions: start, split or finish transmitter
- Available codes: START / LAP / FINISH
- Weight: 320 g
- Dimensions: 55 x 100 x 180 mm
- Compatibility: FxChip / FxChip BLE
- Transmitter with 3 codes: Start / Split / Finish or Lap
- Detection distance: 3 meters on each side
- Accuracy: 1/100 s or 2/100 of a second
- Minimum time between 2 transmitters: 0.7 seconds
- Battery: 3.7 V 5 Ah LiPo with charge indicator and automatic shut-off after 12 h
- Charging time: 10 hours
- Battery life: 60 hours
- Water resistance: IP67
- Temperature resistance: -20°C to +50°C
- Battery: rechargeable
User manual
